Download Print this page

Motorola C1D User Manual

Digital cordless telephone.
Hide thumbs

Advertisement

Digital Cordless Telephone
Motorola C1D
For C1001D, C1002D, C1003D and C1004D
.
Warning: Charge the handset for 24 hours before use

Advertisement

   Related Manuals for Motorola C1D

   Summary of Contents for Motorola C1D

  • Page 1

    Digital Cordless Telephone Motorola C1D For C1001D, C1002D, C1003D and C1004D Warning: Charge the handset for 24 hours before use...

  • Page 2

    Alternative arrangements should be made for access to emergency services. Need help? If you have any problems setting up or using your C1D, please contact Customer Services on (65) 68412668. Email: support@alcom.com.sg Alternatively, you may find the answer in the ‘Help’ section at the back of this guide.

  • Page 3

    • 2 x rechargeable Ni-MH battery cells • Power adaptor for the base • Telephone line cord If you have purchased a C1D multiple pack you will also have the following additional items: • Cordless handset & charger • 2 x rechargeable Ni-MH battery cells • Power adaptor for the charger...

  • Page 4: Table Of Contents

    1. Getting started ............6 2. Getting to know your phone ....... 10 3. Using the phone ............ 15 Switch the handset on / off ............15 Calls ....................15 3.2.1 Make a call ................15 3.2.2 Preparatory dialling ............15 3.2.3 End a call ................

  • Page 5: Table Of Contents

    Delete the entire Calls list ........... 30 9. Using additional handsets ........31 Registering an additional handset ..........31 Register a different make of handset to your C1D base .... 32 Select a base ................. 32 De-register a handset..............32 10.

  • Page 6: Getting Started

    Do not place your C1D in the bathroom or other humid areas. Location You need to place your C1D base within 2 metres of the mains power socket and 1.8 metres from the telephone wall socket so that the cables will reach.

  • Page 7: Connecting The Base

    Connecting the base 1. Plug the telephone line cord into the socket marked on the underside of the base. 2. Plug the power adaptor into the socket marked on the underside of the base and plug the other end into the mains power wall socket. Switch on the mains power.

  • Page 8: Connecting The Handset And Charger

    IMPORTANT Warning! Use only the approved rechargeable Ni-MH battery cells (2 x AAA Ni-MH 450mA rechargeable batteries) supplied with your C1D. Please do not use alkaline or non rechargeable batteries. It may cause permanent damage to the product and void the warranty.

  • Page 9

    1. Press , scroll DATE -- TIME and press CLOCK SET 2. Scroll and press 3. Enter the time in 24 hour format (e.g. 18--30 for 6:30pm) and press to confirm. Your C1D is now ready for use. Getting started...

  • Page 10: Getting To Know Your Phone, Overview Of Your Handset

    2. Getting to know your phone Overview of your handset A Earpiece B Display See page 12 for an overview of the display icons. C Up During a call, press to increase earpiece volume, page 15. When the phone is ringing, press to increase the handset ringer volume, page 21.

  • Page 11

    When viewing the redial / calls list / phonebook or when in the menu, press to exit and return to standby. Dial a #. M Intercom Used to make internal calls and transfer calls to other C1D handsets registered to the base, page 16. N Microphone Getting to know your phone...

  • Page 12: Handset Lcd Display

    External call in progress. Flashes to indicate an incoming internal call. Internal call in progress. 3-way call in progress or transfer an external call to another C1D handset registered to the base. Eco mode is ON. Flashes to indicate new voicemail messages received. Off when you have no voicemail messages.

  • Page 13: Overview Of The Base, Navigating The Menus

    Press and hold to enter registration mode when registering handsets, page 31. Navigating the menus Your C1D has an easy to use menu system. Each menu has a list of options, which you can see on the menu map on the following page.

  • Page 14: Menu Map

    Menu map PHONEBOOK ADD ENTRY MODIFY ENTRY DELETE ENTRY SETUP BASE VOLUME BASE MELODY DEL HANDSET PIN CODE DIAL MODE RECALL DEFAULT ECO MODE HANDSET BEEP INT RING VOL EXT RING VOL INT MELODY EXT MELODY AUTO ANSWER NAME LANGUAGE KEYLOCK ? DATE -- TIME DATE SET...

  • Page 15: Switch The Handset On / Off, Adjust The Earpiece Volume

    3. Using the phone NOTE Your handset will automatically time the duration of all external calls. The call timer will display after the first 15 seconds of your call. When the call ends, the total duration of your talk time is shown for 5 seconds. Switch the handset on / off Press and hold to switch the handset on or off.

  • Page 16: Using The Phone

    Mute You can mute your handset so that you can talk to someone nearby without your caller hearing. MUTE 1. During a call, press . The display shows and your caller cannot hear you. 2. Press again to resume your call. Intercom 3.5.1 Make an internal call...

  • Page 17

    3. If there is no answer from the other handset, press to return to your external caller. 4. Press to end the call. Redial The last 10 entries dialled are stored in the redial list. 3.6.1 View or dial an entry 1.

  • Page 18: Lock / Unlock The Keypad, Paging / Find Handset

    Lock / unlock the keypad You can lock the keypad so that it cannot be operated accidentally while carrying it around. NOTE When the keypad is locked, you can still answer incoming calls and operate the handset as normal. When the call ends, the keypad lock comes on again. 1.

  • Page 19: Store A Name And Number

    Store a name and number If the C1D is connected to a switchboard, you may need to enter a pause in a stored number. This gives the switchboard time to find an outside line.

  • Page 20: Delete An Entry, View Or Dial An Entry, Edit A Name And Number

    View or dial an entry 1. Press icon is displayed. 2. Scroll to the entry you want. Enter the first letter of the name to search alphabetically. The first name that starts with this letter or the nearest letter in the alphabet will be displayed.

  • Page 21: Handset Ringer Volume, Handset Ringer Melody, Auto Answer

    5. Handset settings Handset ringer volume You can adjust the ringer volume and set different volume levels for your internal and external calls. Choose from 5 volume levels or Off. 1. Press , scroll HANDSET and press 2. Press to select INT RING VOL EXT RING VOL and press...

  • Page 22: Handset Name, Battery Low Warning Beep, Key Beep

    Handset name If you are using more than one handset with your C1D base, you can set a personalized name for each handset to easily distinguish between them. A name can be up to 10 characters long. 1. Press , scroll...

  • Page 23: Out Of Range Warning Beep, Keypad Lock Using The Menu

    Out of range warning beep If the handset goes out of range, you will hear warning beeps during a call. You can switch these beeps on or off. HANDSET . The display shows BEEP. 1. Press , scroll and press 2.

  • Page 24: Base Ringer Volume, Base Ringer Melody, Change Base Pin Code

    6. Base settings Base ringer volume Choose from 5 volume levels or Off. SETUP 1. Press , scroll and press . The display shows BASE VOLUME. 2. Press 3. Press to select the volume (1 - 5 or OFF). 4. Press to confirm or to return to the previous menu.

  • Page 25: Dial Mode, Recall Mode, Restore Default Settings, Emergency Default

    Dial mode Your C1D is set to tone dialling. You should only need to change this if connected to an older type of switchboard / PBX which requires pulse dialling. 1. Press , scroll SETUP and press DIAL MODE 2. Scroll...

  • Page 26: Eco Mode

    Eco mode Your C1D offers ECO mode function which reduces the transmitted power and energy consumption when switched on. To switch Eco mode on: 1. Press , scroll SETUP and press ECO MODE 2. Scroll and press 3. Press to select and press to confirm.

  • Page 27: Default Settings

    Default settings Low battery beeps Out of range warning beeps Key beep Auto answer Internal melody Internal volume External melody External volume Ear volume Base melody Base ringer volume Phonebook Empty Calls list Empty Redial list Empty PIN code 0000 Dial mode Tone Recall mode...

  • Page 28: Set The Time, Set Alarm, Switch Off Alarm Ring, Set The Date

    7. Clock & alarm If you have subscribed to Caller ID Service, the date and time will be set on all your handsets whenever a call is received. You can also manually set the date and time on the individual handsets. Set the date 1.

  • Page 29: Caller Id And The Calls List, Calls List, Caller Id

    8. Caller ID and the Calls list IMPORTANT To use Caller ID, you must first subscribe to the service from your network provider. A subscription fee may be payable. To ensure that the caller’s name is displayed, make sure you have stored the full telephone number, including the area code in the phonebook.

  • Page 30

    the entry. When you reach the end of the list, the handset will beep. • If the caller’s number exactly matches an entry stored in the phonebook, the display will alternate between the name and the number. Press to see the caller’s number. •...

  • Page 31: Registering An Additional Handset

    9. Using additional handsets You can register up to five handsets to your C1D base to extend your phone system without having to install extension sockets for each new phone. Each C1D handset can be registered with up to four bases. You can then select the base you prefer to use.

  • Page 32: Register A Different Make Of Handset To Your C1d Base, Select A Base

    Follow the registration instructions given in your handset’s user guide. Select a base If your C1D handset is registered to more than one base (e.g. one at work and one at home), you can select which base to use. Each handset can be registered with up to four bases.

  • Page 33: No Dial Tone, No Caller Id

    25. Cannot register a handset to the base • You can register up to a maximum of 5 handsets to a C1D base. You must de-register a handset in order to register a new one, see page 32. • Check that you have entered the correct PIN code (default = 0000).

  • Page 34: Handset Does Not Ring

    • The base ringer volume may be set to Off, see page 24. Noise interference on my phone or on other electrical equipment nearby • Place your C1D at least one metre away from electrical appliances or any metal obstructions to avoid any risk of interference. Help...

  • Page 35: General Information, Important Safety Instructions

    11. General information IMPORTANT This equipment is not designed to make emergency telephone calls when the power fails. Alternative arrangements should be made for access to emergency services. This product is intended for connection to analogue public switched telephone networks and private switchboards in Singapore, Malaysia and Indonesia.

  • Page 36: Installation Guidelines, Battery Safety Instructions, Save These Instructions

    Installation Guidelines • Read and understand all instructions and save them for future reference. • Follow all warnings and instructions marked on the product. • Do not install this product near a bath tub, sink, or shower. • Operate this phone using only the power source that is indicated on the marking label.

  • Page 37: Product Disposal Instructions, Consumer Products And Accessories Warranty

    Consumer Products and Accessories Warranty Thank you for purchasing this Motorola branded product manufactured under license by Suncorp Technologies Limited, 2/F , Shui On Centre, 6-8 Harbour Road, Hong Kong. (“SUNCORP”)

  • Page 38

    PROVIDED UNDER THIS EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OF IMPLIED. IN NO EVENT SHALL MOTOROLA OR SUNCORP BE LIABLE, WHETHER IN CONTRACT OR TORT (INCLUDING...

  • Page 39

    Motorola or SUNCORP are excluded from coverage. Use of Non-Motorola branded Products and Accessories. Defects or damage that result from the use of Non-Motorola branded or certified Products or Accessories or other peripheral equipment are excluded from coverage. Unauthorized Service or Modification. Defects or damages resulting...

  • Page 40: Technical Information, Connecting To A Switchboard

    Your C1D has a REN of 1. A total REN of 4 is allowed. If the total REN of 4 is exceeded, the telephones may not ring. With different telephone types, there is no guarantee of ringing, even when the REN is less than 4.

  • Page 41

    “THIS PAGE IS INTENTIONALLY LEFT BLANK”...

  • Page 42

    “THIS PAGE IS INTENTIONALLY LEFT BLANK”...

  • Page 43

    Declaration of Conformity (DoC) Suncorp declares that the following products: Brandname: Motorola Type: C1001D, C1002D, C1003D, C1004D Descriptions: DECT phone without telephone answering machine (C100xD) and their multi-handset versions. to which this declaration related is in conformity with the essential requirements of the following directives of the Council of the European Communities: R&TTE Directive (1999/5/EC)

  • Page 44

    Stylized M Logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC. and are used under license. All other trademarks are the property of their respective owners. © 2013 Motorola Mobility LLC. All rights reserved. Version 3 (SG)

Comments to this Manuals

Symbols: 0
Latest comments: