Register A Different Make Of Handset To Your S12 Base; Select A Base; Register A Handset - Motorola STARTAC S12 Manual

9.2

Register a different make of handset to your S12 base

IMPORTANT
DECT GAP Profile only guarantees that basic calling functions will work correctly between
different makes / types of handset and base. There is a possibility that certain features
such as Caller ID will not work correctly.
On the base:
b
1. Press and hold
registration mode for 90 seconds.
On the handset:
Follow the registration instructions given in your handset's user guide.
9.3

Select a base

If your S12 handset is registered to more than one base (e.g. one at work and one at
home), you can select which base to use.
Each handset can be registered with up to four bases.
m
1. Press , scroll
m
2. Press . All the bases that your handset has been registered to will be displayed, e.g.
BASE 1 2 3 4. The currently selected base number flashes.
3. Enter the base number that you want to use.
Alternatively, press
m
4. Press to confirm. You will hear a confirmation beep and the display will return to
standby.
NOTE
If you select AUTO, your handset will automatically search for and connect to the base
with the strongest signal.
9.4 De-register a handset
Use one handset to de-register another. You cannot de-register the handset that you are
using.
m
1. Press , scroll
d
2. Scroll to DEL HANDSET
3. Enter the 4 digit PIN code (default = 0000) and press
4. Enter the handset number that you want to de-register. You will hear a confirmation
beep and the display will return to the previous menu.
Using additional handsets
for 3 seconds until you hear two beeps. The base will remain in
d
to REGISTER and press
u d
or to scroll to AUTO.
d
to SETUP and press
and press
m
. The display shows
m
.
m
.
m
.
SELECT BASE.
31