Select A Base; Unregister A Handset; Pin - Motorola S3001 User Manual

36
When the handset registers with the base, it is assigned a handset
number.
8.7

Select a base

You can register your S3000 handset with up to 4 bases. Once registered,
you can switch between bases, for example, bases at home and at work.
1. Press and scroll
2. Scroll to REGISTRATION
SELECT BASE
3. is displayed. Press
The available bases are displayed with the current base number flashing.
4. Enter the number of the base you want – 1,2,3 or 4.
When the base is found you hear a beep. If not found, the display shows
UNREGISTERED.
8.8

Unregister a handset

Use one handset to delete another. You cannot delete the handset that you
are using.
1. Press and scroll
2. Scroll to UNREGISTER
3. Enter the 4 digit master PIN and press
Display shows the first registered handset number.
4. Scroll or
UNREGISTERED is displayed on the handset screen.
8.9

PIN

The 4-digit master PIN is used when registering or unregistering a handset
and when changing some settings on your S3000. The default setting is
0000. You can change this PIN for more security.
1. Press , scroll
to PIN. Press
2. Scroll
3. Enter the current 4 digit master PIN and press
4. Enter the new PIN and press
5. Press to return to standby.
NOTE
Make a note of your PIN. If you forget your PIN you will need to reset your
product.
Advanced settings
to ADVANCED SET
and press
to ADVANCED SET
and press
to select the handset you want to delete and press
to ADVANCED SET
.
and press
.
.
and press
.
.
and press .
.
.
.
. (Default setting 0000).
.