Table of Contents
Advertisement
34
9.2
Register a different make of handset to your C1 base
IMPORTANT
DECT GAP Profile only guarantees that basic calling functions will work
correctly between different makes / types of handset and base. There is a
possibility that certain features such as Caller ID will not work correctly.
On the base:
1. Press and hold
remain in registration mode for 90 seconds.
On the handset:
Follow the registration instructions given in your handset's user guide.
9.3
Select a base
If your C1 handset is registered to more than one base (e.g. one at work and
one at home), you can select which base to use.
Each handset can be registered with up to four bases.
1. Press
, scroll
SELECT
BASE.
2. Press
. All the bases that your handset has been registered to will be
displayed, e.g.
3. Enter the base number that you want to use. Alternatively, press
to scroll to AUTO.
4. Press
to confirm. You will hear a confirmation beep and the display
will return to standby.
NOTE
If you select AUTO, your handset will automatically search for and connect to
the base with the strongest signal.
9.4
De-register a handset
Use one handset to de-register another. You cannot de-register the handset
that you are using.
1. Press
, scroll
DEL HANDSET
2. Scroll
to
3. Enter the 4 digit PIN code (default = 0000) and press
4. Enter the handset number that you want to de-register. You will hear a
confirmation beep and the display will return to the previous menu.
Using additional handsets
for 3 seconds until you hear two beeps. The base will
to
REGISTER
and press
BASE 1 2 3
4. The currently selected base number flashes.
to
SETUP
and press
and press
. The display shows
.
.
or
.
Advertisement
Table of Contents
