To Set Pbx Access Code; Base Settings; To Set The Base Ringtone; To Set The Base Ringer Volume - Motorola CD111 Owner's Manual

D
Key Beep
3. Scroll
to and press
U D
Off
4. Scroll or to or
O
5. Press to return to standby mode.
8.13

To set PBX access code

If the CD1 is connected to a switchboard, you may need to
enter a one-digit access code in the dialling sequence to be
able to connect to the outside line.
The access code will be displayed at the beginning of a
number on the screen. The code can be up to 4 digits long.
The access code will not be used when you dial the number
manually (such as when you are not dialling from the
phonebook). This allows you to make calls to other
switchboard extensions.
D
Menu
1. Press , scroll to
Set Handset
2. is highlighted. Press
D
Access Code
3. Scroll to
U D
Off
4. Scroll or to ,
Set Code
If you select , enter the switchboard access code
Save
e.g. 9 then press .
O
5. Press to return to standby mode.
34
Select
.
On Select
then press .
Settings Select
and press .
Select
.
Select
and press .
On Set Code Select
or then press

9. Base settings

9.1

To set the base ringtone

Select from 5 base ringtones.
You will hear a sample ring as you scroll to each ringtone.
Menu
1. Press , scroll
D
Set Base
2. Scroll to
Ringtone
3. is highlighted. Press
U D
4. Scroll or
Select
.
O
5. Press to return to standby mode.
9.2

To set the base ringer volume

The base has 5 ring volume settings plus Off.
NOTE
Ring tone 1 and ring tone 3 when set at ring volume 5 will
provide an extra loud ringer on the base.
.
Menu
1. Press , scroll
D
Set Base
2. Scroll to
D
Ringer volume
3. Scroll to
U D
4. Scroll or
Save
and press
D
Settings
to and press
Select
and press .
Select
.
to the ringtone that you want and press
D
Settings
to and press
Select
and press .
Select
and press
to display the volume level that you want
.
Select
.
Select
.
.
Base settings