To Change The Dialling Mode; To Set Ring Priority; To Change The Recall Mode - Motorola CD111 Owner's Manual

O
5. Press to return to standby mode.
9.3

To change the dialling mode

The CD1 is preset to Tone dialling. It is unlikely that you need
to change this setting.
D
Menu
1. Press , scroll to
D
Set Base
2. Scroll to and press
D
Dialling Mode
3. Scroll to
U D
Pulse
4. Scroll or to
confirm.
O
5. Press to return to standby mode.
9.4

To set ring priority

When you have more than one handset registered to your
base, you can set one handset to ring before the other
handsets. This allows one handset user to answer all
incoming calls first, for example, the receptionist.
All Handsets
Choose if you want all handsets to ring at the
Select Handset
same time or
times before the other handsets ring.
D
Menu
1. Press , scroll to
D
Set Base
2. Scroll to and press
D
Ring Priority
3. Scroll to
Base settings
Settings Select
and press .
Select
.
Select
and press .
Tone Select
or then press to
to nominate a handset to ring two
Settings Select
and press .
Select
.
Select
and press .
U D
All Handsets
4. Scroll or to
Select
.
Select Handset
If you choose
displayed.
U D
• Scroll or to the handset you want then press
Select
.
U D
• Scroll or to the number of rings that you want to
set: 2, 4 or 6 and press
O
5. Press to return to standby mode.
9.5

To change the recall mode

Recall is useful to access certain network services and
PABX/switchboard services.
The default recall mode preset in the CD1 is suitable for your
country network and therefore you should not need to
change it.
NOTE
The use of the CD1 cannot be guaranteed on all PABX.
D
Menu
1. Press , scroll to
D
Set Base
2. Scroll to and press
D
Recall Mode
3. Scroll to
U D
Recall 1
4. Scroll or to
confirm.
Select Handset
or then press
, all available handsets are
Select
.
Settings Select
and press .
Select
.
Select
and press .
Recall 2 Select
or then press to
35