Host Authentication - Panasonic WJ-GXD400 Setup Instructions

Host authentication

The information of a PC (host) is registered, which accesses this unit via a network such as a LAN.
Up to 32 hosts can be registered.
1
Click the [User mng.] button on the setup menu.
2
Click the [Host authentication] tab.
The "Host authentication" window will be displayed.
Setup items
I Host authentication
Select "On" or "Off" to determine whether or not to
authenticate the host.
I IP address
Enter the IP address to permit accessing to this unit.
The host name cannot be specified.
I Access level
Select an access level. The setup window can be
accessed through the host with the administrator level.
The settings for "Live image display" are for functions
that are not described in these operating instructions
and they are for expansion of external control interface.
It is impossible to access to the setup menu of these
functions.
1. Administrator/2. Live only
Default: 2. Live only
3
Perform the settings for each item.
Set the IP address and the access level.
Refer to the following for further information about
the settings for each item.
4
Click the [Set] button.
5
Select "On" or "Off" to determine whether or not
to authenticate hosts.
6
Click the [Set] button.
I Host check
Displays the registered IP addresses by clicking [C].
The display type of the IP address is "Registered IP
address [access level]".
To delete the displayed IP address, click the [Delete]
button.
Important:
• The IP address and access level of the PC with
access permission shall be registered before the
setting of host authentication. If host authentication
is set to "On" before registration, the PC cannot
access to this unit.
• Clicking the "Set" button after entry of the registered
IP address provides overwriting of the IP address
information (access level).
39