Panasonic WJ-GXD400 Setup Instructions page 8

Setup items
Event
Site alarm
Site alarm
Originating port number
Alarm message display
Output terminal
Alarm reset timer
Error notification
Error notification
Destination port
Retry times
Destination address
Output terminal
Schedule
Timetable
Display pattern
Schedule
Display pattern registration
Group
Image display on a 6-screen
Image display on a 3-screen
(PSL)
Image display on a 3-screen
(PSR)
Image display on a 1-screen
8
Description
Choose whether or not to activate the site alarm.
Specify the port number to be used for receiving the site
alarm.
Choose whether or not to display the alarm message.
Choose whether or not to provide an alarm signal output from
the output terminal when an alarm signal is received.
Specify the period from alarm occurrence to alarm cancella-
tion.
Choose whether or not to enable the error notification.
Specify the port number to which an error notification is trans-
mitted when an error occurs.
Specify the retry number of the transmission to the PC when
transmission to the PC ends in failure.
Specify the address to which an error notification is transmit-
ted when an error occurs.
Choose whether or not to provide an alarm signal output from
the output terminal when an error notification is received.
Select a display pattern from the registered patterns.
Perform the settings for the schedules by designating a day of
the week and time.
Select a number to be registered from the registered group
numbers and group sequence numbers.
Select a number to be registered from the registered camera
numbers and tour sequence numbers.
Select a number to be registered from the registered camera
numbers and tour sequence numbers.
Select a number to be registered from the registered camera
numbers and tour sequence numbers.
Select a number to be registered from the registered camera
numbers and tour sequence numbers.
Reference
page
22
23
24
25