Schedule; Timetable - Panasonic WJ-GXD400 Setup Instructions

Schedule

The schedule setting is performed in accordance with the specified day of the week and time of the day.
It is possible to switch camera channels to be used to display images according to the set schedule.
Important:
• The audio output is not provided when the schedule is displayed. The audio output is provided only at the default
screen.

Timetable

Timetables are created for each day of the week, and a program is assigned to each timetable. Up to 6 timetables
can be created for each day of the week.
1
Click the [Schedule] button on the setup menu.
2
Click the [Timetable] tab.
The "Timetable" window will be displayed.
Setup items
I Display pattern
Select a registered display pattern from the following.
--/Display pattern 1/Display pattern 2/Display pattern
3/Display pattern 4
Default: --
I Schedule
Perform the settings for the schedules by designating a
day of the week and time.
Up to 6 schedule settings can be performed.
• Day unspecified: Check the "24h" checkbox.
24
3
Perform the settings for each item.
Up to 6 schedule settings can be performed.
Refer to the following for further information about
the settings for each item.
4
Click the [Set] button.
Notes:
• Before display pattern selection, register the display
pattern via [Schedule] and [Display pattern registra-
tion].
• If two or more schedules coincide, a higher num-
bered schedule has a higher priority.
• The entered 1-week schedule is displayed with a
band chart below the [Set] button.
• Even when it passed time of a timetable of the set
schedule, displaying of images will continue accord-
ing to the setting of the previous schedule until other
schedule start displaying images.