Group Setup - Panasonic WJ-GXD400 Setup Instructions

Group setup

1
Click the [Camera] button on the setup menu.
2
Click the [Group] tab.
The "Group setup" window will be displayed.
Setup items
I Group number
Display a group number.
I Screen pattern
Select a screen pattern.
I Registered camera - Image display position 1 - 6
Assign the registered cameras to the display positions
1-6 on the screen.
I Delete
Check the boxes of the group number to be deleted.
Click the [Delete] button.
To apply the deletion to the registered information, click
the [Set] button.
3
Click the [Registered pattern list] button.
The "Registered pattern list" window will be dis-
played.
4
Perform the settings for each item.
Refer to the following for further information about
the settings for each item.
5
Click the [Set] button.
Note:
• To view the image display position from the config-
ured camera, see the reference information dis-
played below [Registered group list].
• When "Group Sequence" is selected, a camera
image is displayed only in 1 position even though
the camera CH is set to display the images in more
than 1 position.
31