Group Sequence - Panasonic WJ-GXD400 Setup Instructions

Group sequence

Live images from the camera/encoder/recorder on all the screens are simultaneously switched and displayed in the
3-screen/6-screen modes. The camera preset position cannot be selected during the group sequence.
Important:
• The audio output is not provided during the sequence display.
• When a sequence is performed with two or more devices, the JPEG and MPEG-4 formats shall not be used
simultaneously with one camera.
1
Click the [Camera] button on the setup menu.
2
Click the [Group sequence] tab.
The "Group sequence number" window will be dis-
played.
Setup items
I Screen pattern
Select a screen pattern.
6-screen/3-screen (primary screen on the left)/3-screen
(primary screen on the right)
I Step
Displays the step number of the sequence. Up to 64
steps can be contained.
I Group number
Displays the registered camera group number.
30
3
Click the [Setup >>] button.
The "Step registration" window will be displayed.
4
Perform the settings for each item.
Refer to the following for further information about
the registrations for each item.
5
Click the [Set] button.
The specified values are stored.
I Dwell time
Select an interval time to go to the next sequential step
from the following.
3s/5s/10s/15s/20s
Note:
• Group registration should be completed via
[Camera] and [Group setup] before group number
selection.