Panasonic WJ-GXD400 Setup Instructions page 28

[Image capture size*]
Select an image capture size. Image capture size can
be selected only when "JPEG" is selected for
"Compression".
Default: Auto
[Transmission interval]
Select a transmission interval when the compression
method is set to JPEG.
The higher the value of ips (images per second) is, the
shorter the transmission interval is.
Auto/0.1ips/0.2ips/0.3ips/0.5ips/1ips/2ips/3ips/
5ips/10ips/15ips/30ips
Default: Auto
For NP472/NW474/NS320, the transmission interval is
selectable from the following:
Auto/1ips/ 2ips/3ips/5ips/10ips/15ips/30ips
Default: Auto
Important:
• When "Via a recorder" is selected for "Live image
source", the image capture size and the refresh
interval will be dependent on the settings of the
recorder. The settings configured on the decoder will
not be applied. Confirm that the settings of the
recorder and the decoder.
• When camera images via the recorder are displayed
in the VGA size, the resolution of the camera shall
be set to "VGA" or "QVGA".
* The resolution is selectable from the following:
Auto/QVGA(320x240)/VGA(640x480)/768x576 /4
VGA(1280x960)
Auto: Select a resolution in accordance with the
screen size.
QVGA(320x240): 320 x 240 pixels resolution
VGA(640x480): 640 x 480 pixels resolution
768x576: 768 x 576 pixels resolution
4VGA(1280x960): 1280 x 960 pixels resolution
The resolution varies with the model of the camera.
28
Notes:
• All options are displayed when the compression
method supported by the target device is unknown.
• Images with the resolution of 4 VGA (1280 x 960)
cannot be displayed in the reduced size of VGA (640
x 480).