Tour Sequence - Panasonic WJ-GXD400 Setup Instructions

Tour sequence

Camera images are automatically switched and displayed in a specified order.
The tour sequence function works with the preset positions of the camera.
Important:
• The audio output is not provided during the sequence display.
• When a sequence is performed with two or more devices, the JPEG and MPEG-4 formats shall not be used
simultaneously with one camera.
1
Click the [Camera] button on the setup menu.
2
Click the [Tour sequence] tab.
The "Tour sequence number" window will be dis-
played.
Setup items
I Step
Displays the step number of the sequence. Up to 64
steps can be contained.
I Camera no.
Select a registered camera.
I Preset camera no. (1-256)
Enter a preset position (blank, 1 to 256).
3
Click the [Setup >>] button.
The "Step registration" window will be displayed.
4
Perform the settings for each item.
Refer to the following for further information about
the registrations for each item.
5
Click the [Set] button.
When no position is entered (blank), the camera does
not move to any preset position.
I Dwell time
Select an interval time to go to the next sequential step
from the following.
3s/5s/10s/15s/20s
Default: 3s
29