Panasonic WJ-GXD400 Setup Instructions page 27

Setup items
I Registered camera list
[Camera no.]
Displays the camera number. Up to 256 cameras can
be registered.
[Camera title]
Displays the registered camera titles.
[Model no.]
Displays the model number of the registered
camera/encoder.
[Address]
Displays the IP address of the registered
camera/encoder.
When "Via a recorder" is selected for "Live image
source", the IP address of the recorder will be dis-
played.
Note:
• To delete the information, select the camera number
and click the [Delete] button.
I NW camera setup
[Camera]
Select a camera number whose information is regis-
tered.
[Live image source]
Select a live image source.
From a camera directly/Encoder/Via a recorder
Default: From a camera directly
[Address]
Enter the IP address of the live image source.
[HTTP port]
Enter a HTTP port number.
Default: 80
[User name]
Enter the user name assigned to the device of a live
image source when user authentication is set to "On" at
the device.
Enter up to 32 alphanumeric characters.
[Password]
Enter the password assigned to the device of a live
image source when user authentication is set to "On" at
the device.
Enter up to 32 alphanumeric characters.
Important:
• When using a camera other than Panasonic i-pro
series, select "Via a recorder" for "Live image
source". In this case, select "JPEG" for
"Compression".Refer to the operating instructions of
the recorder in use for further information on how to
configure the settings of the recorder.
I Information list
[Model no. (Recorder/Encoder)]
Displays the model number of the recorder or encoder.
[Camera CH designation (Recorder/Encoder)]
Select camera channels of the device used as a live
image source.
[Camera title]
Displays the camera title after obtaining the information
if the camera title is assigned to the target device.
This item can be entered and edited.
Up to 16 characters in one byte/two bytes
[Model no.]
Displays the model number after information is
obtained. When routed through the recorder, the model
number of the camera/encoder connected ahead. When
the camera is directly connected, the model number of
the camera is displayed.
[Compression]
Select a compression method. The selectable compres-
sion method varies with the model of the camera whose
information is obtained. When routed through the
recorder, the compression method is decided depend-
ing on the device of the information source.
The compression method is selectable from the follow-
ing:
JPEG/MPEG-4
27