【0006010】
【Enter Setup】
Specify Central Area
The default central area is a (Width*20%) by (Height*20%) area in the center of the scanner's field of view, as shown in the
figure below. You can define the central area by scanning the Specify Central Area barcode and numeric barcode(s)
representing a desired percentage (1-100). If Central Area Decoding is enabled by scanning the Central Area Decoding
barcode, the scanner only reads barcodes that intersect the predefined central area.
**【Whole Area Decoding】
【Specify Central Area】
25
【0322000】
【0322020】
【0322010】
【Central Area Decoding】
【0006000】
**【Exit Setup】