Specify Central Area - Newland HR22 Dorada User Manual

Enter Setup

Specify Central Area

The default central area is a (Width*20%) by (Height*20%) area in the center of the scanner's field of view,
as shown in the figure below. You can define the central area by scanning the Specify Central Area
barcode and numeric barcode(s) corresponding to a desired percentage (1-100). If Central Area Decoding
is enabled by scanning the Central Area Decoding barcode, the scanner only reads barcodes that
intersect the predefined central area.
To learn how to program this parameter, see the "Appendix 5: Parameter Programming Examples".
Specify Central Area
41 ** Exit Setup