Data Packaging; Introduction - Newland NLS-HR32 Series User Manual

When scanning a QR Code barcode, send the leftmost character through the 20th and the 113th
character through the 140th of the data:
1.
2.
3.
4.
Digit 033
Meaning QR Code ID
Barcode Type Section
Note:
1. Up to 3 data extraction sections are allowed for one 2D extraction option.
2. Neither the start position nor end position can be greater than 9999.
3. Data extraction sections can be overlapped. For instance, section 1: 1st character through the 50th (Left to
Right); section 2: 2rd character through the 40th (Left to Right).
Start position can be greater than end position. In the example above, if data extraction section 1 is "000
4.
000020 000001", then the order of the extraction will be the 20th, 19th, 18th... and the leftmost.
5. To extract only one character, make start position equal to end position.

Data Packaging

Introduction

Data packing is designed for a specific group of users who want to have the data packed before transmission. Data
【0006000】
**【Exit Setup】
Scan the Enter Setup barcode.
Scan the Enable Extraction barcode.
Scan the Program Extraction Option barcode.
Scan the numberic barcodes in the following table, the Save barcode and the Exit Setup barcode.
000 000001
Start with
Left to Right
leftmost char
Data Extraction Section 1
000020 000
End with
Left to Right
20th char
Data Extraction Section 2
【0006010】
【Enter Setup】
001013 001040
Start with End with
113th char 140th char
150