Table of Contents
Advertisement
Your PC will now obtain an IP address automatically from your router's
dHCP server.
NOTE: Make sure the router's dHCP server is the only one available on your lAn.
Windows 95/98/Me
1. Click "Start" and select Settings, then click "Control Panel." The Control
Panel window will appear.
2. double-click on the network icon. The network window will appear.
3. Check your list of network Components. If TCP/IP is not installed, click
"Add" to install it now. If TCP/IP is installed, go to Step 6.
4. In the network Component Type dialog box, select "Protocol" and click "Add."
5. In the Select network Protocol dialog box, select "Microsoft and TCP/IP,"
then click "oK" to start installing the TCP/IP protocol. You may need your
Windows Cd to complete the installation.
6. After installing TCP/IP, go back to the network dialog box. Select TCP/IP
from the list of network Components and then click "Properties."
7 . Click on each of the tabs and
verify the following settings:
Bindings: Check "Client for
Microsoft networks" and "File
and printer sharing for Microsoft
networks."
Gateway: leave all fields blank.
DNS Configuration: Select
"disable dnS."
WINS Configuration: Select
"disable WInS Resolution."
IP Address: Select "obtain IP
address automatically."
8. Reboot the PC. The PC will now
obtain an IP address automatically from your router's dHCP server.
NOTE: Make sure the router's dHCP server is the only one available on your lAn.
Windows NT
1. Click "Start" and select Settings, then click "Control Panel." The Control
Panel window will appear.
2. double-click on the network icon. The network window will appear.
3. Check your list of network Components. If TCP/IP is not installed, click
"Add" to install it now. If TCP/IP is installed, go to Step 5.
10
IP AddReSS SeTTInGS
Advertisement
Table of Contents
