Table of Contents
Advertisement
The Home Page screen appears, displaying seven instructional options: Quick
Start, Interface Setup, Advanced Setup, Access Management, Maintenance,
Status and Help.
quiCk stArt
The Quick Start section is designed to get you using the router as quickly as
possible. before configuring the router, check with your ISP (Internet service
provider) as to what kind of service is provided (examples shown below).
PPPoE
PPPoA
RFC1483 Bridged VPI/VCI, VC-based/llC-based multiplexing to use
RFC1483 Routed
1. Click "Run Wizard" to start the configuration; click "next" to continue.
2. Set and confirm the new password; click "next" to continue.
3. Select the time zone; click "next" to continue.
4. Select your Internet connection type (as directed by your ISP); click "next"
to continue.
5. enter the data provided by your ISP. For details on each setting, see the
Interface Setup section below. Click "next" to continue.
6. Restart your AdSl router. Click "next" to save the settings and restart the
router.
1
Web MAnAGeMenT ConFIGURATIon
VPI/VCI, VC-based/llC-based multiplexing, Username,
Password (and Service name).
VPI/VCI, VC-based/llC-based multiplexing, Username,
Password.
bridged Mode.
VPI/VCI, VC-based/llC-based multiplexing, IP Address,
Subnet Mask, Gateway Address and domain name
System (dnS) IP Address (a fixed IP Address).
Advertisement
Table of Contents
