Table of Contents
Advertisement
ADSL
ADSL Mode: The default setting is "Auto Sync-Up." This mode automatically
detects the AdSl mode, including AdSl2+, AdSl2, G.dMT, T1.413 and
G.lite. If you are not sure how to select the AdSl mode, contact your ISP.
ADSL Type: Check with your ISP about the AdSl type of the dSlAM device they
use. (The digital Subscriber line Access Multiplexer, or dSlAM, links many of a
phone company's customer dSl connections to a single high-speed ATM line.)
ACCess mAnAgement
ACL
To restrict users from accessing certain Internet applications/services, such as
Internet Web sites, email, FTP, etc., configure those settings here. The access
control list (ACl) allows you to define the traffic type permitted in your lAn or
WAn. You can control which computer can have access to these services by
entering the IP address of the computer.
ACL: When this is "Activated," make sure that the available applications/
services are designated or access to all the services will be denied.
ACL Rule Index: This is the item number to record the setting rule.
Secure IP Address: The default 0.0.0.0 allows any user to use this service to
remotely manage the router. Type an IP address to restrict access to a user with
a matching IP address.
Application: Choose the services that you permit to be used in your lAn or
WAn interface. These services include Web, Telnet, Ping, FTP and SnMP.
Interface: Select the interface that will allow use of the services above. options
are "lAn," "WAn" or "both."
Web MAnAGeMenT ConFIGURATIon
Advertisement
Table of Contents
