Ip Filter - Intellinet 523455 User Manual

IP Filter
To deny some users access to the router's Web management, enter the IP
addresses here. The default IP 0.0.0.0 allows any user to use the service to
remotely manage the router.
IP FILTER SET EDITING
IP Filter Set Index: This is the item number to record the setting.
Interface: Select which channel (PVC) to configure.
Direction: Select the access to the Internet ("outgoing") or from the Internet
("Incoming") or "both."
IP FILTER RULE EDITING
IP Filter Rule Index: This is the item number to record the setting rule.
Active: Select "Yes" to enable the current rule; "no" to cancel the current rule.
Source IP Address: enter the start IP address that will be monitored.
Subnet Mask: enter the subnet mask based on the source IP address.
Port Number: lAn users employ port numbers to differentiate network applications
(e.g., "21" is for FTP service). The port number range is from 0 to 65535. It is
recommended that this option be configured by an advanced user.
Destination IP Address: enter the start IP address that will be monitored.
Subnet Mask: enter the subnet mask based on the destination IP address.

Web MAnAGeMenT ConFIGURATIon