Table of Contents
Advertisement
Connect to the Computer
with a Parallel Cable
Note: To connect the printer to the parallel port of the computer
requires a certified parallel cable.
You will need to buy the IEEE1284 compliant cable.
1 1
Make sure that both the printer and the computer are turned off.
2 2
Plug the parallel printer cable into the
connector on the back of the printer.
Push the metal clips down to fit inside
the notches on the cable plug.
3 3
Connect the other end of the cable to
the parallel interface port on your
computer, and tighten the screws.
See your computer documentation if
you need help.
If you are using a USB interface
Go to "Using Your Printer with a USB Cable" on
page A.10.
2.6
S
U
Y
P
ETTING
P
OUR
RINTER
To the parallel
port on PC
Advertisement
Table of Contents
Troubleshooting
