Xerox Phaser 3210 User Manual page 32

Control Panel Buttons
3.2
U C P
SING ONTROL ANEL
Cancel job
Press
blink to cancel a job the printer is currently printing.
The light will blink while the print job is cleared
from both the printer and the computer, and then the
printer will return to the Ready mode. This may take
some time, depending on the size of the print job.
If the
Note:
job must be reprinted. There is no undo function.
Reprint last page of the job
If you press
prints the last page of the last print job. See page
5.21.
Turn the Toner Save Mode on/off
Press
(on)
The printer must be in the Ready mode.
• If the button backlight is on, toner save mode
activates and the printer uses less toner to print a
(off)
document.
• If the button backlight is off, toner save mode is
disabled and you will print in normal quality.
To enable or disable the Toner Save mode using this
button, the Toner Save Mode option in the printer
driver must be set to Printer Setting.
For further information on the Toner Save mode,
see page 5.6.
and hold until the control panel lights
button is accidentally pushed, the
in the Ready mode, the printer
to turn the Toner save mode on or off.