Table of Contents
Advertisement
Control Panel Buttons
The printer has three buttons:
Print demo page
Press and hold
for about 2 seconds until the control
panel lights blink slowly to print a demo page. The
printer must be in the Ready mode.
Start manual feeding
When you select Manual Feeder for Paper Source
from your software application, you should press
each time you load a sheet of paper manually. For
further information, see "Using the Manual Input Tray"
on page 4.5.
Clean the inside of the printer
Press and hold
for about 10 seconds until the
control panel lights remain lit. After cleaning the
printer, one cleaning sheet prints. For further
information, see page 6.5.
,
and
.
U
3.1
C
P
SING
ONTROL
ANEL
Advertisement
Table of Contents
Troubleshooting
