Linux Driver Installation - Xerox Phaser 3210 User Manual

Linux Driver Installation

Installation
1. Mount the CD-ROM
A.22
A
PPENDIX
This Linux driver is designed for Xerox Phaser 3210 printer
and supports Linux Red Hat 6.0 or higher and Intel Linux. If
your Linux version is not included, this driver might not
work properly.
I Install Setup Script file configuration
a. /cdrom/linux/install.sh
b. /cdrom/linux/p3210.db
c. /cdrom/linux/readme.txt
To install the driver, open the x terminal screen and take the
following steps:
To mount the CD-ROM drive, you must be a super user
Note:
or must be authorized to mount the CD-ROM by the super
drive.
user. If you fail to mount the CD-ROM drive, ask the system
administrator.
To mount the CD-ROM drive:
1
Insert the Xerox Phaser 3210 CD-ROM into the CD-ROM
drive.
2 Mount the CD-ROM drive under a directory like /mnt in
order to access the files on the CD-ROM:
>mount -t iso9660 /dev/cdrom /mnt/cdrom