Table of Contents
Advertisement
Installing Optional Memory
Precautions
Installation
A.24
A
PPENDIX
Your printer is a full-featured laser printer that has been
optimized to meet most of your printing needs. Recognizing
that each user may have different requirements, however,
additional memory can be added to the Phaser 3210 to
enhance its capabilites.
DISCONNECT THE POWER CORD:
Never remove the printer control board while the printer is
plugged in.
To avoid the possibility of electrical shock, always disconnect
the power cord when installing or removing ANY internal or
external printer option.
DISCHARGE STATIC ELECTRICITY:
The control board and the Memory SIMM are sensitive to static
electricity. Before installing or removing an internal option,
discharge static electricity from your body by touching
something metal, such as the metal back plate on any device
plugged into a grounded power source. If you walk round
before finishing the installation, discharge any static electricity
once again.
Additional printer memory is provided on SIMMs (single in-line
memory modules).
Phaser 3210 has 4 MB standard of the printer memory
Note:
and you can expand the memory up to 68 MB.
Advertisement
Table of Contents
Troubleshooting
