Xerox Phaser 3210 User Manual page 120

TEST
Demonstration Page prints the demonstration page. It shows
features, the specifications, a list of the user default settings
and the amount of printer memory available for printing.
PCL
• Typeface allows you to select the desired typeface. This
setting is ignored when the software application specifies a
font.
• Symbol determines the symbol set. A symbol set is a set of
alphabetic and numeric characters, punctuation, and special
symbols used when printing with a selected font.
• Pitch sets the font pitch (only if you have selected a scalable
monospaced font). Pitch refers to the number of fixed-space
characters in a horizontal inch of type.
• Lines Per Page sets the number of lines that print on each
page. The setting can range from 5 to 128 lines per page.
• Point Size sets the font point size (only if you have selected
a scalable typographic font). Point size refers to the height of
the characters in the font. One point equals approximately
1/72 of an inch. You can select point sizes from 4.0 to
999.75 in increments of 0.25 points.
• COURIER determines the courier font type: Regular or Dark.
Printing from DOS Applications
A.21
A
PPENDIX