Xerox Phaser 3210 User Manual page 93

Problem
Curl or wave
Wrinkles or creases
Back of printouts dirty
Black pages
• Check the paper type and quality. Both high temperature
and humidity will cause paper curl. See "Paper
Specifications" on page A.2.
• Turn over the stack of paper in the input tray. Also try
rotating the paper 180° in the input tray.
• Push the output lever and try printing to the face up output
slot.
• Make sure that paper is loaded properly.
• Check the paper type and quality. See "Paper
Specifications" on page A.2.
• Push the output lever and try printing to the face up output
slot.
• Turn over the stack of paper in the input tray. Also try
rotating the paper 180° in the feeder.
• The transfer roller may be dirty. See "Cleaning the Inside"
on page 6.4.
• Check if the toner is leaking. Clean inside the printer.
• The toner cartridge may not be installed properly. Remove
the cartridge and reinsert it.
• The toner cartridge may be defective and need replacing.
Install a new toner cartridge.
• The printer may require repairs. Contact a service
representative.
Solving Print Quality Problems
Solution
7.15
P S
ROBLEM OLVING