Replacing The Ide Hard Disk Drive; Removing The Hard Disk Drive; Figure A-1 Ide Hard Disk Drive Cover Plate - Fujitsu Stylistic 2300 Technical Reference Manual
Hide thumbs
Also See for Stylistic 2300:
- Instructions (1 page) ,
- Installation instructions (1 page) ,
- User manual (55 pages)
Table of Contents
Advertisement
Appendix A
Replacing the IDE Hard Disk Drive
The internal IDE hard disk drive in the Stylistic 2300 pen tablet can be removed and replaced, if
necessary.
Observe the following guidelines when handling the hard disk drive:
• Do not attempt to disassemble or modify the hard disk drive.
• Do not remove any labels from the hard disk drive.
• Handle the hard disk drive only by the sides.
• Avoid touching connector pins and circuit boards on the drive or pen tablet.
Electrostatic discharge caused by doing so can damage sensitive
components.
Removing the Hard Disk Drive
To remove the hard disk drive from the pen tablet,
1. Ensure that the pen tablet is off. To do so, carry out the Shut Down command in the Start menu.
2. Using a Phillips screw driver (size #1), remove the two screws in the hard disk drive cover plate and
remove it as shown in Figure A-1.
Caution
Figure A-1 IDE Hard Disk Drive Cover Plate
Microsoft Corp. Exhibit 1020
A-1
Advertisement
Table of Contents
