Switching On/Off The Power; Switching On The Power; Switching Off The Power - Fuji Xerox DocuPrint C3055 User Manual

2.2

Switching On/Off the Power

Switching On the Power

1. Press the power switch to the <|> position.
2. When the power is switched on, the display
reads [Please wait...]. Wait until the
message changes to [Ready to print].
Note
• When the display reads [Please wait...], the printer is
warming up and is not ready to print yet.
• If an error message is displayed, refer to "Error
Messages (in Alphabetical Order)" (P. 147) to remedy
the error.

Switching Off the Power

Important
• Do not switch the power off while the hard disk (optional) is being accessed. In the Power Saver mode,
the <Power Saver> button blinks when the hard disk is being accessed.
• Do not switch the power off when the display reads [Please wait...].
• Do not switch the power off during printing. Doing so can cause paper jams.
• Switching the power off erases the print data remained in the printer and the information stored in the
printer's memory.
1. Make sure that printer is not in operation by
checking the display or indicator lamps.
2. Press the power switch to the <O> position.
38
2 Basic Operation