Fuji Xerox DocuPrint C3055 User Manual page 105

Setting Item
Adobe Protocol Sets the PostScript communication protocol.
• [Auto]
• [Standard]
• [BCP]
• [Binary]
• [TBCP] (default)
Note
• On the DocuPrint C3055, [Adobe Protocol] appears only when the
• Select an appropriate option according to the data format specified on your
• [Adobe Protocol] is valid only when printing in PostScript.
• After changing this setting, reboot the printer.
[Port9100]
Set this when using a Port9100 port.
Network / Port
Port9100
Setting Item
Port Status Sets whether to enable or disable a Port9100 port at printer start-up.
• [Enable] (default)
• [Disable]
Note
• After changing this setting, reboot the printer.
Print Mode Sets the method of processing data (print language).
• [Auto] (default)
• [ESC/P], [PDF], [PS], [PCL]
• [HexDump]
Note
• On the DocuPrint C3055, [PS] appears only when the PostScript software kit
Automatically detects the PostScript communication protocol.
Select this when the communication protocol is in ASCII format.
Select this when the communication protocol is in binary format.
Select this when no special processing is required for data.
Select this when the communication protocol are both in ASCII and binary
formats and switches between the two using control codes.
PostScript software kit (optional) is installed.
print driver.
Port9100
Port Status
Port9100
Print Mode
After receiving data from a computer, the printer automatically detects its
print language and processes the data accordingly. (See *1 on P. 130.)
After receiving data from a computer, the printer processes the data with the
selected print language.
Allows you to view data received from a computer by printing it in ASCII
codes (hexadecimal format). (See *3 on P. 130.)
(optional) is installed.
Description
Description
5.2 Setting the Common Menus
105