Adobe Protocol - Fuji Xerox DocuPrint C3055 User Manual

[EtherTalk]
Set this when using an EtherTalk port.
Note
• [EtherTalk] appears only when the network expansion card (optional), and the PostScript software kit
(optional for the DocuPrint C3055 only) are installed.
Setting Item
Port Status
[USB]
Set this when using a USB port.
Setting Item
Port Status
Print Mode
104
5 Control Panel Menus
Network / Port
EtherTalk
Sets whether to enable or disable an EtherTalk port at printer start-up.
• [Enable] (default)
• [Disable]
Note
• After changing this setting, reboot the printer.
Network / Port
USB
Sets whether to enable or disable a USB port at printer start-up.
• [Enable] (default)
• [Disable]
• After changing this setting, reboot the printer.
Sets the method of processing data (print language).
• [Auto] (default)
After receiving data from a computer, the printer automatically detects its
print language and processes the data accordingly. (See *1 on P. 130.)
• [ESC/P], [PDF], [PS], [PCL]
After receiving data from a computer, the printer processes the data with the
selected print language.
• [HexDump]
Allows you to view data received from a computer by printing it in ASCII
codes (hexadecimal format). (See *3 on P. 130.)
Note
• On the DocuPrint C3055, [PS] appears only when the PostScript software kit
(optional) is installed.
EtherTalk
Port Status
Description
USB
Port Status
USB
Print Mode
USB

Adobe Protocol

Description