Printer Settings; Substitute Tray; Display Screen - Fuji Xerox DocuPrint C3055 User Manual

[Printer Settings]

The [Printer Settings] menu allows you to set paper trays and the Auto Tray Selection
feature.

[Substitute Tray]

Printer Settings
Substitute Tray
Setting Item
Substitute Tray Sets whether to switch to another paper tray if the paper tray selected by Auto
Tray Selection runs out of paper. If using this feature, set the paper size for the
substitute tray.
• [Off] (default)
• [Larger Size]
• [Closest Size]
• [Bypass Feed]
Note
• These settings will be overridden by requests sent from computers.

[Display Screen]

Printer Settings
Display Screen
Setting Item
Bypass Tray Sets whether to display a screen to prompt for a paper type every time paper is
loaded in the bypass tray.
• [No]
• [Yes] (default)
Paper Tray Sets whether to display a screen to prompt for a paper type every time paper is
loaded in the paper trays.
• [No]
• [Yes] (default)
Does not substitute the tray, and displays a message asking to load paper
into the paper tray.
Switches to another paper tray that contains the paper that is one size larger
than the size requested, and prints documents at 100% zoom ratio.
Switches to another paper tray that contains the paper of the size closest to
the size requested, and prints documents at a reduced zoom ratio if
necessary.
Switches to the bypass tray and prints documents on the paper loaded in the
bypass tray.
Display Screen
Bypass Tray
Display Screen
Paper Tray
Description
Description
5.2 Setting the Common Menus
119