Snmp Settings - Fuji Xerox DocuPrint C3055 User Manual

[E-mail Printing]
Set whether to use the E-mail Printing feature.
Setting Item
E-mail Printing

[SNMP Settings]

Set this when using an SNMP port. SNMP must be used when managing multiple printers
remotely with an application. SNMP manages printer information and provides it to the
application.
Setting Item
Port Status
106
5 Control Panel Menus
Network / Port
E-mail Printing
Sets whether to enable or disable an E-mail port at the printer start-up.
• [Enable] (default)
• [Disable]
Note
• After changing this setting, reboot the printer.
Network / Port
SNMP Settings
Sets whether to enable or disable an SNMP port at printer start-up.
If you selected [Enable], select also UDP or IPX.
• [Enable] (default)
• [Disable]
Note
• When using UDP protocol, both the printer and client computers must have
IP addresses.
• [IPX] appears only when the network expansion card (optional) is installed.
• To determine which protocol (UDP or IPX) to use, refer to the manual
supplied for the application.
• After changing this setting, reboot the printer.
E-mail Printing
Port Status
Description
SNMP Settings
Port Status
Description
Port Status
SNMP UDP
Port Status
SNMP IPX