Fuji Xerox DocuPrint C3055 User Manual page 117

[mm/inch]
System Settings
mm/inch
Setting Item
mm/inch Sets the unit of measure for length that will be displayed or entered on the con-
trol panel.
• [Millimeters (mm)] (default)
• [Inch (")]
[Local Access]
System Settings
Local Access
Setting Item
Local Access Sets whether to enable the Local Access feature.
• [Off] (default)
• [On]
Note
• After changing this setting, reboot the printer.
Refer to
• "7.8 Authentication and Auditron Administration Features" (P. 186)
[Scanner]
Note
• The scanner is not available in some countries. Contact your dealers for details.
System Settings
Scanner
Setting Item
Interrupt Print Sets whether to give priority to a document received from the scanner.
• [Off]
• [On] (default)
Indicates length in millimeters (mm).
Indicates length in inches (").
Scanner
Interrupt Print
Description
Description
Description
5.2 Setting the Common Menus
117