Fuji Xerox DocuPrint C3055 User Manual page 127

[Calibration]
If colors look off after relocating the printer, or after replacing its drum cartridge, print the
Calibration Chart to perform calibration.
For details on color calibration, refer to "7.9 Adjusting Color Density" (P. 192).
Maintenance Mode
Calibration
Setting Item
Chart Print Prints the Calibration Chart when the <Eject/Set> button is pressed.
Enter Value Adjusts the density of cyan (C), magenta (M), yellow (Y), and black (K).
• [-6] to [6] (default: [0])
[Non Condensing]
Maintenance Mode
Non Condensing
Setting Item
Non Condensing Sets whether to enable the Non-condensing mode to prevent dew condensa-
tion.
• [Disable] (default)
• [Enable]
Refer to
• "6.8 Non-condensing Mode" (P. 158)
Calibration
Chart Print
Calibration
Enter Value
Description
Description
5.2 Setting the Common Menus
127