Weighed Nominal Value, Tolerance Limits ± 2,5%, ± 5,0%, ± 7,5 - KERN FIS 30K10 IPM Operating Instructions Manual

8.2.2 Weighed nominal value, tolerance limits ± 2,5%, ± 5,0%, ± 7,5%
2.5%, 5% or 7.5% are assigned to the
Note: See chapters 6.2 – 6.4 for assignment of the function key
F
The nominal weight is weighed upon start-up of the function.
Tu and To are calculated. The result is displayed on the bar graph and the signal LEDs.
Apply a new weight of 1.790 kg.
88
F
key
A nominal weight of 1.700 kg is
on the balance
Start the tolerance check
function.
Setting, for example, ±5%
symmetrical to nominal value
The weight is above To.
The yellow signal LED is
turned on.
FIS-BA-def-0411