7 Weighing operation
7.1 Function test
ON
OFF
Changeover to weighing operation. The balance is now ready for operation
Applying voltage or activating the
causes an automatic initial zero setting to be carried out if the weight value is
less than +/- 10% of the weighing range.
FIS-BA-def-0411
Automatic function test by
applying voltage or activating the
All display segments and LEDs
are activated.
Display of the installed
programme version (example).
(6.459.51)
Version no. of approved software
Version no. functions
ON
OFF
key after a stand-by disconnection
ON
OFF
key (test).
Amendment status
81