Control Board Removal - Thermal Arc 201 TS Service Manual

THERMAL ARC 161STL, 201TS

7.02 Control Board Removal

!
Read and follow safety information in Section 6.02 before proceeding with disassembly
Refer to diagram on page 7-3.
1. M4 Screw. Remove 4 screws from Control panel.
2. Disconnect J8 harness from J8 connector.
3 Disconnect J7 harness from J7 connector.
4. Disconnect J2 harness from J2 connector.
5. Disconnect J6 harness from J6 connector.
6. Disconnect J5 harness from J5 connector.
7. Disconnect J4 harness from J4 connector.
8. Disconnect J3 harness from J3 connector.
9. Disconnect J9 harness from J9 connector.
10. Disconnect J1 harness from J1 connector.
Ensure to unplug all harness from the main control PCB.
5
6
Disassembly Procedure
3
7
8
DISASSEMBLY PROCEDURE
2
9
4
7-2
1
Art # A-10163
10
Manual 0-5148