Front Panel (Operator Interface) Circuit Board Pc2 Removal - Thermal Arc 201 TS Service Manual

THERMAL ARC 161STL, 201TS

7.04 Front Panel (Operator Interface) Circuit Board PC2 Removal

!
Read and follow safety information in Section 6.02 before proceeding with disassembly
1. PROCESS Selector Switch Boot
Remove the rubber boot from the PROCESS Selector switch by turning the retaining nut counter clockwise.
2. WELD CURRENT Control Knob
Remove the WELD CURRENT KNOB by loosening the set screw.
3. WELD CURRENT control mounting nut
Remove mounting nut.
4. Front Panel PCB3
Remove the Front Panel PCB3 from the panel.
5. Panel mounting screw
Remove screw.
Disassembly Procedure
DISASSEMBLY PROCEDURE
Art # A-10169
7-6
5
6
Manual 0-5148