THERMAL ARC 161STL, 201TS
8.02 Installing Back Panel
1. Install ON/OFF switch.
2. Install power cord.
3. Reconnect Input Wire on the ON/OFF switch.
4. Reinstall Magnet onto Ground Wire.
5. Install fan.
6. Reconnect power ON/OFF switch to terminals on Main Power PCB.
7. Reconnect Ground Wire to Main PCB.
8. Reconnect Rear Panel screws.
Assembly Procedures
1
2
Art # A-10182
8-2
ASSEMBLY PROCEDURES
3
4
5
Manual 0-5148