Management Ports - Cisco Catalyst 3560-C Hardware Installation Manual

Hide thumbs Also See for Catalyst 3560-C:
Table of Contents

Advertisement

Front Panel
For information about SFP modules, see your SFP module documentation and the
Modules" section on page
page

Management Ports

You can connect the switch to a PC running Microsoft Windows or to a terminal server through either
the RJ-45 console port or the USB mini-Type B console port, also referred to as the USB-mini console
port.
The USB-mini console interface speeds are the same as the RJ-45 console interface speeds.
To use the USB-mini console port, you must install the Cisco Windows USB device driver on the device
that is connected to the USB-mini console port and that is running Microsoft Windows.
For information about downloading the Cisco USB device driver, see the
Note
Windows USB Device Drivers" section on page
With the Cisco Windows USB device driver, connecting and disconnecting the USB cable from the
console port does not affect Windows HyperTerminal operations. Mac OS X or Linux require no special
drivers.
The 5-pin mini-Type B connectors resemble the 4-pin mini-Type B connectors. They are not compatible.
Note
Use only the 5-pin mini-Type B. See
Figure 1-7
The configurable inactivity timeout reactivates the RJ-45 console port if the USB-mini console port is
activated, but no input activity occurs for a specified time period. When the USB-mini console port
deactivates due to a timeout, you can restore its operation by disconnecting and reconnecting the USB
cable. For information on using the CLI to configure the USB-mini console interface, see the switch
software guide.
Catalyst 3560-C and 2960-C Switch Hardware Installation Guide
1-10
GLC-FE-100BX-U=
CWDM SFPs
2-31. For cable specifications, see the
B-3.
RJ-45 console port. The RJ-45 connection uses an RJ-45-to-DB-9 female cable.
USB-mini console port (5-pin connector). The USB connection uses a USB Type A-to-5-pin
mini-Type B cable.
USB Mini-Type B Port
C-4.
Figure
1-7.
Chapter 1
Product Overview
"Installing SFP
"SFP Module Cables" section on
"Installing the Cisco Microsoft
OL-23803-02

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents