Cisco Catalyst 3560-C Hardware Installation Manual page 47

Chapter 2 Switch Installation
Use the two number-10 Phillips pan-head screws to secure the DIN rail mount to the switch.
Step 2
See
Figure 2-18
MO DE
1
Mounting the Switch on a DIN Rail
Do not install the switch with its front panel facing up. Following safety regulations, install the switch
Caution
with its front panel facing down, to allow sufficient airflow and to provide easier access to the cables.
To prevent airflow restriction, allow clearance around the ventilation openings to be at least:
Warning
3 in. (7.6 cm) Statement 1076
Position the switch directly in front of the DIN rail, making sure that the top of the DIN rail mount clip
Step 1
hooks over the top of the DIN rail. See
OL-23803-02
Figure 2-18.
Securing the DIN-Mount Tray to the Switch
SY ST
STA T
DP LX
1
SP D 2
3
Po E 4
5
PD 6
CO NS OL 7
E
8
PO WE R
OVE R
ET HE RN
ET
Switch
Se rie s
PD
1
2
2 Number-10 Phillips pan-head screws
Figure 2-19.
Catalyst 3560-C and 2960-C Switch Hardware Installation Guide
Mounting the Switch
1
2
2-21