Sfp And Qsfp Module Slots; Management Ports - Cisco Catalyst C3850 Series Hardware Installation Manual

Table of Contents

Advertisement

Product Overview
Depending on the installed power supply modules, each port can deliver up to 60 W of Cisco UPOE. See the
Power Supply Modules, on page 25
Cisco UPOE power per port. The output of the PoE+ circuit has been evaluated as a Limited Power Source
(LPS) per IEC 60950-1.
Note
Restrictions for the WS-C3850-12X48U-L, WS-C3850-12X48U-S and WS-C3850-12X48U-E switch models:
• A maximum of 28 ports are available for UPoE connections. This is because some power from the power

SFP and QSFP Module Slots

The uplink and downlink ports for the Catalyst WS-C3850 switch models are as follows.
• The downlink ports on the Catalyst WS-C3850-12S and WS-C3850-24S switch models support standard
• The downlink ports on the Catalyst WS-C3850-12XS and WS-C3850-24XS switch models support
• The 10G downlink ports on the Catalyst WS-C3850-48XS-S, WS-C3850-48XS-F-S, WS-C3850-48XS-E
• The 40G downlink ports on the Catalyst WS-C3850-48XS-S, WS-C3850-48XS-F-S, WS-C3850-48XS-E
For supported SFP modules, refer to the Cisco Transceiver Modules Compatibility Information at
http://www.cisco.com/en/US/products/hw/modules/ps5455/products_device_support_tables_list.html
Note
For information about the (uplink) SFP module slots on the network modules, see
11.

Management Ports

The management ports connect the switch to a PC running Microsoft Windows or to a terminal server.
• Ethernet management port. See
• RJ-45 console port (EIA/TIA-232). See
• USB mini-Type B console port (5-pin connector).
The 10/100/1000 Ethernet management port connection uses a standard RJ-45 crossover or straight-through
cable. The RJ-45 console port connection uses the supplied RJ-45-to-DB-9 female cable. The USB console
port connection uses a USB Type A to 5-pin mini-Type B cable. The USB console interface speeds are the
same as the RJ-45 console interface speeds.
OL-26779-05
supplies is diverted to the switch, and only the remaining power is transmitted to the ports.
SFP modules.
standard SFP+ modules.
and WS-C3850-48XS-F-E switch models support standard SFP+ modules.
and WS-C3850-48XS-F-E switch models support standard QSFP modules.
for the power supply matrix that defines the available PoE, PoE+, and
Ethernet Management Port, on page
RJ-45 Console Port, on page
Catalyst 3850 Switch Hardware Installation Guide
SFP and QSFP Module Slots
Network Modules, on page
30.
31.
9

Advertisement

Table of Contents
loading

Table of Contents