Cisco Catalyst 3560-C Hardware Installation Manual page 48

Mounting the Switch
Figure 2-19
1 Switch
Rotate the switch down toward the DIN rail until the release tabs on the DIN rail mount clicks.
Step 2
Step 3 Lift lightly on the bottom of the switch to ensure that it is firmly locked in place.
After you install the switch, see the
about the switch configuration.
Catalyst 3560-C and 2960-C Switch Hardware Installation Guide
2-22
Mounting the Switch on a DIN Rail
1
"After Installing the Switch" section on page 2-31
Chapter 2 Switch Installation
for information
OL-23803-02