Installing A Cover For The Reset Button (Optional) - Cisco Catalyst 3560-C Hardware Installation Manual

Installing a Cover for the Reset Button (Optional)

Installing a Cover for the Reset Button (Optional)

You can cover the reset button to prevent accidental or unauthorized reset of your switch.
To install a cover on the reset button:
1.
2.
3.
Figure 2-21
1
Figure 2-22
1
Catalyst 3560-C and 2960-C Switch Hardware Installation Guide
2-24
Locate the cover (in the accessory kit).
Remove the adhesive sticker from the back of the cover.
Apply the cover on the switch. See
cover to other switch models as well.
Reset Cover on the Catalyst 2960CPD-8PT-L Switch
1
R E S E T R E S E T R E S E T
A U X 53 A U X 53
V V
, 1. 5A , 1. 5A
2
Switch
Reset Cover on the Catalyst 2960CG-8PC-S Switch
1
R E S E T R R R R E S E T R R R R E S E T E S E T
E T
T
2
Switch
Figure 2-21 and Figure 2-22
2 Reset button cover
2 Reset button cover
Chapter 2 Switch Installation
as examples. You can apply the
OL-23803-02