AMX Modero MVP-5200i Operation/Reference Manual page 94

Protected Setup Pages
Calibration Page
The Calibration page (FIG. 70) allows you to calibrate the touch panel for accurate button selection.
FIG. 70 Calibration page
1. Press and hold the center button on the navigation wheel for 6 seconds to access the Calibration
page (see FIG. 54).
2. Press the crosshairs in turn. If the crosshairs are not touched within ten seconds, the MVP-5200i
will return to the Protected Setup page.
3. The page will read "Calibration Successful. Touch to continue." Touch anywhere on the screen to
return to the Protected Setup page.
If the screen is not touched at that point, the device will automatically return to the
Protected Setup page within 10 seconds.
Always calibrate the panel before its initial use, and after downloading new firmware.
86 MVP-5200i Modero Viewpoint Widescreen Touch Panel