AMX Modero MVP-5200i Operation/Reference Manual page 10

Introduction
The MVP-5200i comes with an integrated rear "kickstand", allowing it to be used and displayed away
from a Charging Station if necessary (FIG. 2). It also comes with a pre-installed 802.11g WPA/WPA2
SDIO wireless card.
Kickstand
FIG. 2 MVP-5200i side view (with kickstand)
MVP-5200i Specifications (FG5966-01, FG5966-02)
Dimensions:
Weight:
Enclosure:
Power Requirements
(Without Charging):
Power Requirements
(While Charging):
Minimum Power Supply
Required:
Power Modes:
Certifications:
2
4 3/4" x 7 9/16" x 13/16" (120.7 mm x 191.8 mm x 20.3 mm)
• Panel: 1.4 lbs ( )
0.64 kg
MVP-5200i-GB: High-gloss black plastic with brushed metal retaining ring.
MVP-5200i-GW: High-gloss white plastic with brushed metal retaining ring.
Panel with battery fully charged:
• Constant current draw: 0.3 A @ 12 VDC
• Startup current draw: 0.4 A @ 12 VDC
Panel while charging battery:
• Constant current draw: 1.1 A @ 12 VDC
• Startup current draw: 1.3 A @ 12 VDC
• PS3.0 Power Supply (FG423-30) - both 120 VAC and 240 VAC models are
shipped with this power supply
• AWAKE: All necessary modules are powered up and device remains online
with the Netlinx Master.
• ASLEEP: Only the backlight will be turned off after the user selectable time of
inactivity has elapsed. Panel resumes the ON mode in ~ 1 second.
• STANDBY: Power to all components other than the touch screen is turned off
after the user selectable time of inactivity has elapsed. Device will turn back
on by touching the screen.
• SHUTDOWN: Power to all peripherals and components is turned off. The
system remains in this mode until it is rebooted.
• FCC Part 15 Class B and CE
• CE
• IEC60950
• RoHS
• Japan Approved
• Lithium-Polymer microbattery: UN/IATA
MVP-5200i Modero Viewpoint Widescreen Touch Panel
DC power jack
Mini-USB port