Open (Clear Text) Settings - AMX Modero MVP-5200i Operation/Reference Manual

Protected Setup Pages

Open (Clear Text) Settings

Press the Open (Clear Text) button to open the Open (Clear Text) Settings page (FIG. 60).
FIG. 60 Wireless Settings page - Open (Clear Text) Settings
Open security does not utilize any encryption methodology, but requires an SSID (alpha-numeric) entry.
This entry must match the Network Name (SSID) entry of the target WAP so the panel knows what
device it is using to communicate with the network.
Open (Clear Text) Settings
SSID (Service Set Identifier):
Save/Cancel:
Refer to the Configuring Wireless Network Access section on page 25 and the Using the Site Survey
tool section on page 27 for further details on these security options.
70
Opens an on-screen keyboard to enter the SSID name used on the target
WAP. The SSID is a unique name used by the WAP, and is assigned to all
panels on that network. An SSID is required by the WAP before the panel is
permitted to join the network.
• The SSID is case sensitive and must not exceed 32 characters.
• Make sure this setting is the same for all points in your wireless network.
• NXA-WAP200Gs use AMX as their default SSID.
• If this field is left blank, the panel will attempt to connect to the first available
WAP.
• Save - store the new security information, apply changes, and return to the
previous page.
• Cancel - discard changes and return to the previous page.
MVP-5200i Modero Viewpoint Widescreen Touch Panel