Using the NetLinx Master to control the G4 panel
Refer to the particular NetLinx Master's instruction manual for detailed information on how to download
the latest firmware from www.amx.com. This firmware build enables SSL certificate identification and
encryption, HTTPS communication, ICSP data encryption, and disables the ability to alter the Master
security properties via a TELNET session.
In order to make full use of the SSL encryption, the web browser used should incorporate an
encryption feature. This encryption level is displayed as a Cipher strength.
Once the Master's IP Address has been set through NetLinx Studio version 2.x or higher:
1. Launch your web browser.
2. Enter the IP Address of the target Master (example: http://198.198.99.99) into the web browser's
Address field.
3. Press the Enter key on your keyboard to begin the communication process between the target
Master and your computer.
4. Click OK to enter the information and proceed to the Master's Manage WebControl Connections
window. This page (FIG. 43) is accessed by clicking on the Manage connections link (within the
Web Control section within the Navigation frame). Once activated, this page displays links to G4
panels running the latest G4 Web Control feature that were previously set up and activated on the
device.
FIG. 43
Manage WebControl Connections page (populated with compatible panels)
MVP-5200i Modero Viewpoint Widescreen Touch Panel
Initially, the Master Security option is disabled from within the System Security page, and no
username and password is required for access or configuration.
Both HTTP and HTTPS Ports are enabled by default via the Manage System > Server page.
If the Master has been previously configured for secured communication, click OK to accept
the AMX SSL certificate, if SSL is enabled, and then enter a valid username and password
into the fields within the Login dialog.
G4 panels
Configuring Communication
Compatible
devices field
(showing G4
WebControl links)
Compression
Opt ions
45